Re: [BaadAssGremlins] Re: Fastener Info. Needed

[<badass73gremlin@xxxx>]

From: "lumina333" <lumina333@xxxx>
Date: 2004/06/30 Wed AM 07:43:45 EDT
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Subject: [BaadAssGremlins] Re: Fastener Info. Needed

I use those T bar valve cover chrome bolts the kinds you see on custom engines some are alum they look great on a engine plus its easier to get access to your rockers if need be.tho the thread part sometimes stayes in the head when you try and unskrew it from your v cover but i added loctite when i skred the threads in the t bars and have never had a prob since
Bart



Thank you, Doc!
--- In BaadAssGremlins@xxxxxxxxxxxxxxx, "amc74hornet" 
<AMC74HORNET@xxxx> wrote:
> I believe they are 1/4" X 3/4" USS thread (course) If you lost the 
bolts you also lost the funny pie shaped flat washers that go under 
the valve cover bolts that distributes the pressure a little more 
evenly than plain round flat washers. They are available in different 
configurations at your local auto parts store. I had to pick up some 
for my friend when we were putting the new motor in his AMX.
> "Doc"