--- In BaadAssGremlins@xxxxxxxxxxxxxxx, Plumpy72@xxxx wrote: > I finally got around to pulling the fuel tank from the parts car. Once I got > it home I cut the entire sending unit receptacle out and prepped it for my new > tank. The float was shot and when I tested the unit with a fuel gauge, it > didn't work properly. > > It won't be a total waste though. For now I'll remove the float mechanism and > modify the unit with a second pick-up tube then install it on the new tank. > Although the unit was originally mounted on the back side of the gas tank, I > may mount it on the top. In the future I can always buy another sending unit and > swap it out to use with a gauge. > > One more thing.........your window regulator is on the way. I cleaned it up a > little before I boxed it up. Let me know when it arrives. > > Ya'll have a good weekend. > > Rick An excellent idea haveing the provision for a fuel tank sender installed in the tank at this time. You can always install a working sender at a later date. Kennedy American has them for 89$. Thanks for the regulator, i'll let you know when it arrives. "Doc"