Re: [Amc-list] 195.6OHV "full flow" oil - Joe's Motor

[Joe Fulton <piper_pa20@xxxxxxxxxxx>]

Yeah, I misspoke again.  I forgot that my 63 block did NOT have the oil part at the front cam bearing location.  That's why to took the oil supply directly from the oil gallery.

JOe


--- On Sun, 10/19/08, Frank Swygert <farna@xxxxxxx> wrote:

> From: Frank Swygert <farna@xxxxxxx>
> Subject: Re: [Amc-list] 195.6OHV "full flow" oil - Joe's Motor
> To: amc-list@xxxxxxxxxxxx
> Date: Sunday, October 19, 2008, 4:17 PM
> In the pic Joe shows the line running directly to the head
> from the main oil galley, just two 90s and the line. The 65
> TSM shows the oil line coming from the front cam bearing in
> the side of the block just above the main oil galley.
> That's where the first cam bearing journal meters flow
> to the head. Looks like Joe has an earlier block without the
> passage to the front cam journal.

 > http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list