Re: [Amc-list] 195.6OHV "full flow" oil - Joe's Motor

[Joe Fulton <piper_pa20@xxxxxxxxxxx>]

Yes, I'll watch it.  I do have that front opening from the oil gallery at the front cam bearing but I thought from our earlier discussions that full oil flow would not make a big difference.  I can change the oil line routing pretty easily though.

Joe Fulton


--- On Sun, 10/19/08, Frank Swygert <farna@xxxxxxx> wrote:

> From: Frank Swygert <farna@xxxxxxx>
> Subject: Re: [Amc-list] 195.6OHV "full flow" oil - Joe's Motor
> To: amc-list@xxxxxxxxxxxx
> Date: Sunday, October 19, 2008, 4:17 PM
> In the pic Joe shows the line running directly to the head
> from the main oil galley, just two 90s and the line. The 65
> TSM shows the oil line coming from the front cam bearing in
> the side of the block just above the main oil galley.
>> Amc-list@xxxxxxxxxxxx
> http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list