[Amc-list] Quick'n Dirtie

["Brien Tourville" <hh7x@xxxxxxxxxxx>]

BLOWTHRU@xxxxxxxxxxxxxxx



There are 2 messages in this issue.

Topics in this digest:

1a. Re: Blowthrough    
    From: ruloelausente

2a. Re: How To??    
    From: ruloelausente


Messages
______________________________________________________________________
__

1a. Re: Blowthrough
    Posted by: "ruloelausente" rulo711@xxxxxxxxxxx ruloelausente
    Date: Sat Apr 21, 2007 10:31 pm ((PDT))




Hi, first excuse me my bad english. 

if you dont find a a kit you can make
your own kit, 

go to the junk and get a turbocharger, 

you can find one
cheap come from a mopar spirit R/T. 

or go www.ebay.com, you can buy one
from 50-200 dollars. 

next you need to buy oil lines, fuel lines and the
pipes, 

dont worry for the exhaust manifold, 

simply you need to cut the
oiriginal exhaust pipe and then weld a pipe to the turbocharger. 

Here a
specialist can make this job for 60-70 dollars. 

the next thing is to adapt
the oulet of the turbocharget to the carb, 

in order to deliver the forced
air to the carb, you will need a carb bonnet (carb hat).

 If the turbo
works on low psi, you would not need to modify the carb because no
aditional fuel source needed. 

i hope this helps you to get a turbo. 

i
thinks is cheaper than buy a kit. 

Grettings Rulo S. 

"Un barracuda jamas
tira aceite, solo marca su territorio" - -- 





In BLOWTHRU@xxxxxxxxxxxxxxx,
Carse <carson@...> wrote: > >

 Thanks Bryan; > > 
I look forward to the
information on this thread. > >

I have a Ford 460  that I'm interested in
turbo chatging. 

Unfortunatly, I don't find a turbo kit for this engine. 
it is  a carburated engine. 

I am thinking about a Holly TBI system as a base
and a turbo charger on top. > > Carse >




Messages in this topic (2)
______________________________________________________________________
__
______________________________________________________________________
__

2a. Re: How To??
    Posted by: "ruloelausente" rulo711@xxxxxxxxxxx ruloelausente
    Date: Sat Apr 21, 2007 10:34 pm ((PDT))

hi, you dont need a special intake, just connect the outlet of the 
turbo charger to the carb with a pipe and a carb bonnet (you can buy 
one
on ebat at 70 dollars or a really god one for 150". 


Thanks --- 

In
BLOWTHRU@xxxxxxxxxxxxxxx, "jtyrna" <jtyrna@...> wrote: > > 

I have a 77
mustang II and i was want to turbo it but i daont know how > 
to set it up with a carb.


 was wonder how you would set up the whole > intake or were you could 
buy the special intake?? >




<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BLOWTHRU/

<*> To change settings online go to:
    http://groups.yahoo.com/group/BLOWTHRU/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:BLOWTHRU-normal@xxxxxxxxxxxxxxx 
    mailto:BLOWTHRU-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    BLOWTHRU-unsubscribe@xxxxxxxxxxxxxxx







<~~>





OK.........there........... that about cover is!






ANY.................... QUEST- ions............;)




  
        =Bt=
  milnersXcoupe
   "The Heretic"

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list