" From: "Swygert, Francis G MSgt 436 CES/CECM" <Francis.Swygert3@xxxxxxxxxxxx> " " [] " " The master cylinder for the 52-72 Full Size Fords has a 1.125" bore for " the Big Bendix 3.1" calipers. Perfect for 71-76 AMCs (all) and 77-78 " Matador sedans and wagons. " " [] " " The Jeep CJ kit should work if you pull the booster and turn the bracket " upside down, but I'm not sure if the push-rod is long enough. Master " cylinder bore is the same 1.125" with left ports as the full-size Ford " kit, but the Jeeps used 2.6" calipers 79-86 (the kit states 74-86). ~'74-8 cjs used the same big bendix calipers as amc cars. not only big fomoco cars but also trucks up to 6900lb f250s did, and ih small trucks. there was also a variant with a 3.375" piston. the 2.6" calipers were used on cjs and xjs up to '89/'90, exactly the same as on amc cars. later calipers are similar in size and may be compatible. full size jeeps used a delco caliper shared with gm full size and light trucks. ________________________________________________________________________ Andrew Hay the genius nature internet rambler is to see what all have seen adh@xxxxxxxxxxxxxxxxx and think what none thought _______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://www.amc-list.com/mailman/listinfo/amc-list