Dave, Did you ever get your rear axle sorted out? I was curious what it turned out to really be. Todd On Saturday 25 November 2006 12:04, d stohler wrote: > i am trying to get new bearings for my rear end in my 62 classic. there is > a parts store in town that has some in stock and can get the rest. problem > is, they say there are 2 different rearends for that car. none i have heard > of. people on here say it is an amc model 15. the book at carquest says > there is a spicer 53, and a spicer 27A. one has a 7.25" ring gear, and the > other has a 9.something ring gear. i havent yet had a chance to measure my > ring gear to see. but it has bearings and seals that seem to make it look > like there are actually 4 different axles. i have the 196, and 3 speed > manual. the tab on the diff cover says 9/34. in my tsm that shows a gear > ratio so im pretty sure that means it is the 3.77 rear. but what the axle > tells me, and what the book at carquest tells me is coming up different. > they show one rearend from like 58-62, and the other is like 61-63 or > somethin i think. anyway, some help would be great. i need to pull the axle > shafts out to have the bearings pressed off, but would be great if i knew > what i have before hand so i can have the parts ordered if needed so i can > get it all done in one afternoon. they have a machineshop in the back of > the carquest so they can do it all for me real quick and easy there. > > hope everyone is havin a great thanksgiving weekend. > > dave stohler > _______________________________________________ AMC-List mailing list AMC-List@xxxxxxxxxxxx http://www.amc-list.com/mailman/listinfo/amc-list or go to http://www.amc-list.com