[BaadAssGremlins] Brake Conversion
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[BaadAssGremlins] Brake Conversion



I just got my Gremlin back from the paint shop and am
now in the rebuild process.  Yippee Skippee! 

I converted from drum brakes to front disk and when
pulling the system from the junk yard pulled the
firewall lines and porportioning valve that went with
it.  In compairing the new versus old valve, they look
exactly the same valve except for the electrical
switch.  The disk valve has two wires, while the old
has only has one.  

Does anyone know if the valves themselves are indeed
the same?  Can I swap them out and keep the original
single wire switch?

Thanks!


Bill
Dallas, TX
'72 Gremlin (Stipped and at the paint shop)
'72 Olds Custom Cruiser Wagon
'71 Mark III
'70 Cadillac Convertible

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/BaadAssGremlins/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx 
    mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated