[BaadAssGremlins] Re: Back in the amc way

["djdaveinpa" <djdave@xxxxxxxxxxx>]

--- In BaadAssGremlins@xxxxxxxxxxxxxxx, "djdaveinpa" <djdave@...> wrote:
>
> --- In BaadAssGremlins@xxxxxxxxxxxxxxx, "djdaveinpa" <djdave@> wrote:
> >
> > Last night I managed to get the drivers side door off. I also made the
> > HUGE dent a little smaller, also found broken window tracks in that
> > door, along with missing rods.
> > Took the 2 drums to work, and found 1 is uncuttable, its widest point
> > is over 10.060. Now I am in need of a drum, if anyone out there is
> > reading this and find themselves with an extra drum, I can provide
> > pics/specs. Steel drum, just need 1. 
> > Ordered new brakes from rockauto, along with the transmission mount,
> > wheel studs, leaf spring bushings, rear wheel cylinders and a rear
> > brake hose. 
> >   I have decided on painting the undercarrage black. I havent picked a
> > car color yet. 
> > I have a set of hinges off the car that need new pins and bushings.
> > Back to work :-)
> >
> 
> Repaired hinges on drivers side door with GM pin kits, Sending unit is
> working again after some solder on the float, and replacing the inner
> contact with a small screw. siliconed the outside of the float too.
> The inside filter was shot, so I attached a 5/8" gm metal inline
> filter. Got the headliner out along with the whole dashboard.
>

Next post..
Filter had to go, wouldnt fit in with the float..
I will add a 2nd inline.
Did some work over the weekend on the gremmie, took out the wiring
harness (interior) and the fusebox. Only had to cut 1 wire. Took the
EM brake works out, and painted it up. Gas tank straps are now
painted, Started to work on the dented drivers side door, but need to
buy some tools (dent puller, fender tools) 
Rear brake shoes showed up here sat. but no wheel cylinders. 






 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/BaadAssGremlins/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx 
    mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/