Re: [BaadAssGremlins] Re: 77 AMX leaf springs wanted
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BaadAssGremlins] Re: 77 AMX leaf springs wanted



I agree they should have fit. As far as your fix went I think it is just
fine. I have used the red rubber hardware stores sell in bulk for a lot
on things, for shim's, gaskets and for other things. I believe it is
internally re-enforced and it's original use was for plumbing gaskets on
large pipe flanges. As far as the 3 leaf spring versus the 4 leaf the 4
leaf will ride  slightly harder but will be hardly noticeable. Also when
the springs settle the car's ride height will not drop much. I also used
a HD Monroe Gas shock. I like the little harder ride and the better
handling. Does your car have a front sway bar? Mine didn't so I added a
new HD V8 one from I can't remember who now 2 years ago. I was told by
the instructor at the AARP 55 Alive driving course I took for a better
insurance rate that I was an aggressive driver. Being one and having a
car that handles is a priority for me. Is your car  6 or V8? Mine is a
6.
"Doc"



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 
--- Begin Message --- Doc, I did get all new bushings, shackles and u-bolts.  The bushings
I got were the OEM rubber, not the urethane ones.  My car had the 3
leaf springs, and I purchased their 4 leaf standard ones, if that
makes a difference.  But even still, their bushings should have
fit.  What do you think of my fix?  I figured that since the rubber
is encased in the leaf's eyelet, it should be ok.

Dan

--- In BaadAssGremlins@xxxxxxxxxxxxxxx, AMC74HORNET@... wrote:
>
> Mine fit perfectly. Now don't yell at me because this may sound
like a
> stupid question but I have to ask it, you did get all new
bushing's and
> shackles didn't you? I used their urethane bushing's and new 
shackles
> in my yellow car on the old springs and they fit fine. On the
orange car
> the springs were 3 leafs and shot with some one adding a set of
long
> shackles to try to raise the car up. On the orange car I used
their HD 4
> leaf springs with new shackles and urethane bushing's with out a
> problem. Welcome to the world of AMC's. 
> "Doc"
>





--- End Message ---


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated