[BaadAssGremlins] Plastic Grill Repair & Plastic Parts In General
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[BaadAssGremlins] Plastic Grill Repair & Plastic Parts In General



Davis I always back up the parts I used the Plastic Weld System up with
model sheet plastic or thin piece of 1/8" plexi glass and on occasion
even used JB Weld on some parts. Street driving can be pretty rough too
with all the bumps and pot holes. Eastwood sells a plastic welding kit
but if I remember correctly it is a bit expensive. Also on grills you
must make sure you have all the screws and brackets installed properly.
"Doc"



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated