[BaadAssGremlins] Fw: throwout bearing question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[BaadAssGremlins] Fw: throwout bearing question



Al has a problem with the trans eating throwout bearings. Chances are some 
of you trannie and interchange whizzes can help out somehow and it would be 
appreciated if you could share your expertise and possibly steer him in the 
right direction. Thanks in advance to all who might reply, and please be 
sure to copy your reply to Al.
Eddie Stakes


----- Original Message ----- 
From: "Al Schlobohm" <AlSchlobohm@xxxxxxxxxxxx>
Subject: '67 Rambler American Convertible


> Hi Eddie,
>
> I'm writing to see if you might know how
> to solve my transmission problem.
>
> My '67 Rambler American has the wrong engine in it.
> It's a later model 232 6 cylinder and the guy who I
> got the car from drilled holes in the original transmission
> (3 spd. w/overdrive) to make the engine bolt up.
>
> As you can imagine, he didn't get it lined up quite right
> and the car eats throw-out bearings about every 700 miles.
>
> Will the 1970 199 6 cylinder that I have, have the old
> bolt pattern and will simply installing this older engine
> into the '67 solve my problem??
>
> Any advice would be appreciated.
>
> Thanks again for all your assistance.
>
> Al Schlobohm
>
> Home # 636-451-5851 



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/YtqqlB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated