Re: [BaadAssGremlins] Re: I just dont know anymore :( :( (Building my 401)

[SCOTT BALDAUF <blue77gremlin@xxxxxxxxx>]

I think those Randall Gremlins got in the low 13s or even 12s if they could hook and not break. In my experience a big cam did not run as good as a smaller cam. Depends if you want off the line grunt or half way down more power. I would think you would have a good chance to reach 13 or 12s with a 401. Davis kicks butt with a 360 in a gremlin I thought. Matching the parts combo is the best way to get a good street car. You will do fine, listening to these guys.

                                                             SCOTT

deezildennis <dsinks@xxxxxxxxxxx> wrote:

> I see what your saying. But I started out with the assumption my 401 
> was a 9.5 CR.
>
> I bought parts accordingly and took advice without proper knowledge of 
> what I really wanted.
>
> My mistake and I am paying for it now by having to tear down my motor 
> again.
>
> So heres where Im at.  I want high 12's low 13's 
>
> Can that be done by leaving the heads alone and knocking down the cam 
> to the 214/224 grind adding the Performer intake and going with a 650 
> or 600 carb? Maybe even a 50 or 75 shot?
>
> Im listening, I really am.

---

 Yahoo! FareChase - Search multiple travel sites in one click.

SPONSORED LINKS

Amc gremlin

Automotive maintenance

Automotive radiators

---

YAHOO! GROUPS LINKS

•  Visit your group "BaadAssGremlins" on the web.
   
•  To unsubscribe from this group, send an email to:
   BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---