[BaadAssGremlins] Re: 77 hornet ball joints

["amc74hornet" <AMC74HORNET@xxxxxxxxx>]

--- In BaadAssGremlins@xxxxxxxxxxxxxxx, "Charles Burch" <warlocke@xxxx> wrote:
> well this may sound stupid but its funny that it works, no matter what im working on if i cant get it out or get past somthing, etc i just say if i cant get it out im selling it then go back in the house for an hour or so go back out and it comes right out lol, funny but works most of the time, id like to know how this works
>   ----- Original Message ----- 
>   From: Plumpy72@xxxx 
>   To: BaadAssGremlins@xxxxxxxxxxxxxxx 
>   Sent: Monday, September 12, 2005 10:28 PM
>   Subject: Re: [BaadAssGremlins] Re: 77 hornet ball joints
> 
> 
>   Dan,
> 
>   What ever you do, don't try to beat it out with a hammer. You will end up mushrooming the bolt and it will not work through the hole. Care to guess how I know that?
> 
>   Keep it saturated with the Liquid Wrench and don't get in a hurry. Give it time to penetrate. If you just have to hit on it with a hammer, do it to the head of the bolt. It may work the rust loose. Do you have a compressor and an air impact? If not, try a breaker bar and use a back-and-forth motion on the head of the bolt.
> 
>   Yelling, screaming and shouting profanity doesn't help either...........it make you feel better, but it doesn't get the bolt out. Remember, it's been in there a looooong time and when you put it back together, dab a little never-seize on the bolt........like you did on the other side : )
> 
>   Good luck.
> 
>   Rick  
> 
> 
>   SPONSORED LINKS Amc gremlin  Automotive maintenance  Automotive radiators  
> 
> 
> ------------------------------------------------------------------------------
>   YAHOO! GROUPS LINKS 
> 
>     a..  Visit your group "BaadAssGremlins" on the web.
>       
>     b..  To unsubscribe from this group, send an email to:
>      BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx
>       
>     c..  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 
> 
> 
> ------------------------------------------------------------------------------
If you are talking about the tie rod end where it bolts to the steering knuckle after soaking it like everyone said use 2 hammers and hold one against one side of the steering knuckle and hit the other side with the other hammer. It will usually pop loose. This is an old trick I learned from my father. Or there is a tool for this. Some times it is difficult to help when you are not given the proper info such as part names.
"Doc"  














------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/YtqqlB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/