well i agree with the last post you dont need to go crazy with the heads at all a mild port and gasket match for a mild motor is enough, as far as cams the companys all have tech lines and i have used about every cam maker there is and not had a problem. we have a basicly stock 71 360 9-1 comp, big summit cam, mild ported stock heads roller rockers, electric water pump, 750 holley double pumper, a 3500 stall convertor, turbo 400 trans, amc 20 rear 3.54 gears locked, 11.32 118 mph best time 11.45 all day long, you do not have to build some crazy motor to make power but tune the whole driveline properly and your results will be amazing. we have also used the old crane fireball cam many times with great dyno results for horse power, over 300 to the rear wheels with a r4b in a stock 343, sometime simple works the best, you can achieve 400 hp cheaply with a basickly stock amc with cam change, intake, right carb gears and headers, signed a old school hot rodder Georges DAD ------------------------ Yahoo! Groups Sponsor --------------------~--> Help save the life of a child. Support St. Jude Children's Research Hospital's 'Thanks & Giving.' http://us.click.yahoo.com/6iY7fA/5WnJAA/Y3ZIAA/YtqqlB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/