Re: Re: [BaadAssGremlins] Hey Davis
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Re: [BaadAssGremlins] Hey Davis



From: Davis Martin <martin-davis@xxxx>
Date: 2004/07/24 Sat AM 07:23:06 EDT
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Subject: Re: [BaadAssGremlins] Hey Davis

Thanks Bart,
Bill is now a BAG member so that is appropriate. I had it under me cause it was my first AMC I ever bought. 
I am having a heck of a time finding a co. local that has the roll bar material I need to build the 5 point for my Gremmie. I found a gut that builds roundie rounds that will bend up the bar for 5 bucks a bend but I can't find the 1 3/4 X .134 tubing. I may end up having to buy the kit from S&W. I was hoping to get it done on the cheap. .120 wall stuff is all over but I run the risk of it being below the NHRA req. .118 min thickness. 
SO waddaya think of my frame connectors? I messed up and welded them in passed the leaf spring bolt. Good think I already put the new ones in with the new polly bushings! 
Davis 


Nice job Davis,and you should take measurments of your gremlins inside and then give them to a reputable rollbar/cage maker or Competition Engineering or Chassis or Chris Alston and have em make you up a set.Chassis Enginering did my 4 point for under 200$course i went to Jupiter Fl. and picked mine up so it saved me on shipping since i was only 45 minutes away lol
Bart


Bart








Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated