Re: [BaadAssGremlins] Re: blowers whining thru 232 and 258 intakes...some differences...

[harold losey <strlcuckoo_46@xxxx>]

The two barrel intake I used on my 74 Gremmie/258, and replaced with a four, was off of a 232 from the 60's. I still have it and the carb if interested(before it goes on e-bay)

Jerry Casper <gremlingts@xxxx> wrote:

   As far as bolt-up goes, the 232 and 258 are the
same....BUT, I think the 232 intake was offered ONLY
as a 1-bbl, whereas the 258 could be had with either a
single or 2-bbl carb. I don't think you could even get
a 232 with a 2-bbl carb. So if you wanted the extra
power, you'd have to get the special 2-bbl 258 intake.
Different physically, not just a plate adapter, ya
know. And you'd have to get the "set" of intake and
exhaust, I believe the exhaust manny's were different
between them, but not exactly sure. Best to get the
whole deal if you can, much like disc brake setups. :)


Jerry in Virginia
8 Gremlins, none running dammit ( 2 needing carbs, I
have them now, just need warm weather to install...)

__________________________________
Do you Yahoo!?
Yahoo! Mail - More reliable, more storage, less spam
http://mail.yahoo.com

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/BaadAssGremlins/
   
• To unsubscribe from this group, send an email to:
  BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Do you Yahoo!?
Yahoo! Mail - More reliable, more storage, less spam