Re: [BaadAssGremlins] Re: 360 Engine Take Down - Part 2 & Help Question

[Davis Martin <martin-davis@xxxx>]

Also Lu,

 Make sure that if the block needs to be bored that the machine shop has an AMC torque plate. Just ask them if they have access to one they will know what you mean. Any amc bore job should be done with a torque plate in place.

 Davis
lumina333 <lumina3@xxxx> wrote:

> Thanks Davis - I will try that tomorrow. I was told that a good 
> mechanic can be identified by a beat-up hammer handle....I now know 
> what he meant! -Lu-
>
> --- In BaadAssGremlins@xxxxxxxxxxxxxxx, Davis Martin <martin-
> davis@xxxx> wrote:
> > Lu,
> >  The Oli dipstick tube comes out by taping it out from the inside 
> of the engine out. Tap it lightly, and twist it as you go it should 
> come out fairly easy. If not they are only 11 bucks at the dodge 
> dealer. 
> >  Davis 
> >