Re: [BaadAssGremlins] Re: Drive Pulley Removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [BaadAssGremlins] Re: Drive Pulley Removal
- From: Davis Martin <martin-davis@xxxx>
- Date: Sun, 29 Feb 2004 05:07:50 -0800 (PST)
after the 4 bolts for the fan are off and the fan is removed it should just pop off. You may need to hit it with some PB Blast and tap it off with a rubber or plastic hammer.
Davis
lumina333 <lumina3@xxxx> wrote:
It's the pulley that sits in front of the water pump. It is labeled
drive pulley in the book that I have, but it just says 'remove it'.
Thanks, Doc.
> Are you talking about the crankshaft dampner? If so you need a
puller for it. It is similar to a steering wheel puller but bigger.
> "Doc"
Back to the Home of the AMC Gremlin