Re: [AMC-list] Flywheel Resurfacing

[Wrambler <wrambler242@xxxxxxxxxxx>]

Last time I did a clutch without resurfacing the flywheel the disc was gone in a thousand miles.

Never again.

Mark Price
Morgantown, WV 26508
1969 AMC Rambler, 4.0L, EFI, T-5
2004 Grand Cherokee Laredo, 4.7L, Quadratrac II
"I realize that death is inevitable.
I just don't want to be around when it happens!"

----- Original Message -----

> From: "Bruce Hevner" <scramblr@xxxxxxxxxxx>
> To: amc-list@xxxxxxxxxxxx
> Sent: Tuesday, February 8, 2011 4:26:34 PM
> Subject: [AMC-list] Flywheel Resurfacing
> 
> Unless it checks good for wear AND flatness (which is seldom true) I
> ALWAYS
> resurface the flywheel. Why wouldn't you spend the $30 or so
> (depending
> where you live) to KNOW it's good??
> 
> Even if it LOOKS Ok it can be cupped resulting in uneven wear and
> shorter
> disc life. IMHO you're not doing a complete job unless you do. 
> 
> You should SEE how BAD some of the flywheels I grind are!!! I have
> seen them
> without much wear but cupped .020 or more !!!!!
> 
>  
> 
> But hey,,,, that's just ME!!
> 
> Bruce Hevner
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20110208/7a34c6c0/attachment.htm>
> _______________________________________________
> AMC-list mailing list
> AMC-list@xxxxxxxxxxxxxxxxx
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com