[AMC-list] 68 Javelin upper control arm bushings
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[AMC-list] 68 Javelin upper control arm bushings



Halfway into redoing the front end on the javelin.  Thanks for all the help
so far.  Got another question.  Doing the bushings on the upper control arms
and the ones I bought from Kennedy don't look the same as the factory ones
that were on the car.  The old ones have a flat washer on one side and a
curved washer on the other side of the bushing. The new ones don't have the
washers on either end, but I can see where they would go.   I talked to
Kennedy and they said that is the way the came even back in the day.  He
said he can't remember what he did on his but some sledge the washers on the
bushings and some don't.  I wouldn't see how it would work right if you
didn't get the washers on either side of the bushing, but thought I'd ask
here and see if anyone has any experience/opinions.

I'll have to go the a fastener store and see what i can get to fit them.  I
had to tear the old ones up pretty good to get them off.

Oh by the way, I assume its probably a small AMC world, so if the guys from
Kennedy American are on here, sorry, not that I didn't believe you, I was
just getting more info....

Thanks again

Greg DePratt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20100603/3a53d39c/attachment.htm>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated