Re: [AMC-list] Wheel stud

[tom jennings <tomj@xxxxxxx>]

Are you sure about that size? All the AMCs I've owned were 1/2-20 thread...
I too got replacement studs from NAPA.




> I converted my 70 AMX from drum brakes all the way around to front disc.  I
> got the rotor from a doner AMC car, but I am not sure which one.  The rotor
> and caliper etc all fit fine.  I replaced the original 14 x 6 wheels with 15
> x 7  magnum 500's.  I am using the two spacers on the front wheels.  The
> problem is that I would really be much more comfortable with a stud that was
> a little longer (maybe 1/4").  I do not have the exact diameter of the stud.
>  It is 7/16" thread.  Before I go any further, has anyone run into this
> problem?  Any advice?
>
> Thanks,
> Jim
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20100416/af10428d/attachment.htm
> >
> _______________________________________________
> AMC-list mailing list
> AMC-list@xxxxxxxxxxxx
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20100416/b121e127/attachment.htm>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com