Re: [AMC-list] Wheel stud

[adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)]

" From: feltonjk@xxxxxxx
" 
" 
" 
" 
" I converted my 70 AMX from drum brakes all the way around to front
" disc.  I got the rotor from a doner AMC car, but I am not sure which
" one.  The rotor and caliper etc all fit fine.  I replaced the original
" 14 x 6 wheels with 15 x 7 magnum 500's.  I am using the two spacers
" on the front wheels.  The problem is that I would really be much more
" comfortable with a stud that was a little longer (maybe 1/4").  I do
" not have the exact diameter of the stud.  It is 7/16" thread.  Before
" I go any further, has anyone run into this problem?  Any advice?

that's an unusual stud.  every amc i've ever heard of - also mopars
and fords - had 1/2-20 studs.  only gm used 7/16 afaik.

i don't know if it would affect your problem, but amc used 3 different
setups in the '70s, and the last one had several variations, including
2 different calipers overlapping 3 different rotors running on 2
different spindles.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx                       and think what none thought
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com