Re: [AMC-list] progress...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [AMC-list] progress...



i have a friend who has welded several tanks. i thought i would have to fix
one so asked him his way. he takes a shop-vac and sucks out, and an air line
from the compressor going in the sending unit hole. then, after it "smells"
clean, he puts his extra argon tank with an old hose from an old welder
pumping argon into it while he welds it. i dont know why it wouldnt be ok to
just leave either the shop-vac, or an air line blowing in while you weld. it
takes a certain amount of fumes to be flamable, and once they are gone, there
aint enough left. dave stohler
www.picasaweb.google.com/das24rules
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated