Re: [AMC-list] progress...

[wrambler242@xxxxxxxxxxx]

I've read all kinds of tried and true methods. I got two major problems. Making welds that I know are perfect. 
Second one is. If the vapor level is not low enough. There will be this loud boom. The area surrounding said boom will be on fire. My wife will wonder "now where did he go?". 
------Original Message------
From: das24rules@xxxxxxxxx
Sender: amc-list-bounces@xxxxxxxxxxxx
To: amc-list@xxxxxxxxxxxx
ReplyTo: das24rules@xxxxxxxxx
ReplyTo: AMC, Rambler, Nash,Jeep and family
Subject: Re: [AMC-list] progress...
Sent: Mar 24, 2010 10:58 PM

i have a friend who has welded several tanks. i thought i would have to fix
one so asked him his way. he takes a shop-vac and sucks out, and an air line
from the compressor going in the sending unit hole. then, after it "smells"
clean, he puts his extra argon tank with an old hose from an old welder
pumping argon into it while he welds it. i dont know why it wouldnt be ok to
just leave either the shop-vac, or an air line blowing in while you weld. it
takes a certain amount of fumes to be flamable, and once they are gone, there
aint enough left. 
dave stohler
www.picasaweb.google.com/das24rules
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com


Sent from my BlackBerry® wireless device from U.S. Cellular
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com