Re: [AMC-list] AND ANOTHER THING 195.6 OHV cylinder head cooling problem

[tom jennings <tomj@xxxxxxx>]

On Fri, Feb 5, 2010 at 10:03, <wrambler242@xxxxxxxxxxx> wrote:

> Drill the hole. I always do a 1/8" hole in mine. Doesn't hurt a bit!
>  You won't have an issue unless you go really large with the hole
>   One guy drilled a 5/16" hole in his to allow the hot water to circulate
> up onto his efi temp sensor and reported it worked ok.
>


OK, thanks. THe worst I can do is wreck a thermostat. I'm thinking of
running 180 degrees also. I've got 195 now. I know the higher temp is
probably a little better overall, but this head tends to run hot, screw it,
I'll keep it cooler than optimum to minimize expansion.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20100205/7a434389/attachment.htm>
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com