Re: [Amc-list] Installing an accelerator cable in 71 Gremlin 232

[tom jennings <tomj@xxxxxxx>]

It just pries off! The wire runs into a sort of cylindrical end, that
presses over a ball on the carb lever. There's a spring latch in the little
cyl. Stick a 3/8" open end wrench between the carb lever and cable end and
just pry it. It'll pop off.



On Tue, Mar 31, 2009 at 5:23 AM, Ted Dooling <tdooling@xxxxxxxxxxx> wrote:

> I can usually do basic repairs with no problem, but I am having trouble
> figuring out how to separate the accelerator cable from the carb so I can
> replace it. in my 71 Gremlin 232. The round ball that holds it on seems to
> be one piece that doesn't unscrew. Would anyone know if I need to order an
> additional part or can I dis-assemble the piece that holds the cable to the
> carb linkage?
>
> As always...thank you for any replies.
>
> Ted
>
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
>



-- 
All your arguments are invalid.
Enjoy your unstable system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://splatter.wps.com/pipermail/amc-list/attachments/20090331/111b5e58/attachment.htm 
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list