Re: [Amc-list] Brakes, still not good

[Tom Jennings <tomj@xxxxxxx>]

Frank Swygert wrote:
> Since the MC is already installed it should be pretty easy to "bench bleed". Just take the lid off, bend some lines around (or use the rubber line kit), and pump the pedal. Gotta be easier than doing it in a vise! 


Personally, I've found that that doesn't always work -- the master has 
to be level, and they're tilted back -- by design -- when mounted on the 
car. The ports are not quite at the front end of the working guts of the 
'pump' in there... so a bubble can live in there if not level. I thinkt 
hat's what it takes so !@!!@$@$ long to bleed 'em sometimes, the bubble 
just pushes back and forth and only a tiny corner of it clips the port 
and exits.
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list