[Amc-list] Compression Ratio

["Bruce Hevner" <scramblr@xxxxxxxxxxx>]

>i have heard  that the frod cams were retarded by as much as 6-8* for the
late 70's. i need to know >what to do about mine in the chero.

It wasn't the cams,, it was the timing chain gear. And mostly on the 460s if
I remember correctly. Make sure and use a HP timing chain set and you should
be OK. Wouldn't hurt to check the cam though.

If in ANY doubt about cam choice,,, CALL THE MFGR (except Comp!!,, don't
EVEN get me started). I have found MOST of them (especially the smaller
guys) to be very helpful in picking the correct cam for your combination. 

Dyno 2000 is getting pretty old (I was a beta tester for it). You might want
to look at this stuff,,
http://www.virtualengine2000.com/
They have a free engine kackulator that is helpful.

But HEY,,, that's just ME!
Bruce Hevner

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://splatter.wps.com/pipermail/amc-list/attachments/20081009/97e1c696/attachment.htm 
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list