Re: [Amc-list] piston interchange - 62cc Heads for build

[Greg Taylor <amundaza@xxxxxxxxx>]

Bryan,
If you need some heads with larger than 58-cc chambers, I have the 304 heads that are opened up to ~62 cc (could go larger) and machined currently for SB Chevy 1.94" & 1.50" valves (smaller stems).  Could go to 1.94/2.02" and 1.625" valve sizes (I have an extra set of 1.94/1.60 valves for them).  Heads have mild port/polish work done and are machined for screw-in studs.  Email me back at amundaza@xxxxxxxxx if you're interested in them.

Sincerely, 
Greg Taylor :) <>< 
Rochester Hills, MI
1989 Jeep Grand Wagoneer "TRMN8R2"

And the testimony is this, that God has given us eternal life, and this life is in His Son. He who has the Son has the life; he who does not have the Son of God does not have the life. - 1 John 5:11-12


--- On Thu, 7/31/08, James Shadwick <idahoAMX@xxxxxxxxx> wrote:

From: James Shadwick <idahoAMX@xxxxxxxxx>
Subject: Re: [Amc-list] piston interchange
To: "AMC/Rambler owners, drivers and fans." <amc-list@xxxxxxxxxxxx>
Date: Thursday, July 31, 2008, 11:11 AM

Bryan....

The 343 FT pistons will fit in your 360 just fine....however you should 
be aware that your
CR will be around 11 to 1  even with the 58cc heads.....I built a 360 
with Badger 343 FT
pistons for my Gremlin race car.....with 56cc heads my CR was around 
11.2 to 1 ...
ran really good........make sure you check your piston to valve 
clearance ....

Jim


teamamc wrote:
> I am having a brain fart here. 
> I have a 1971 360 engine block I am boring  40 over. 
> I have a new set of 40 over 343 flat tops pistons. 
> I have the 1971 360 Rods  
> I will have 58 CC 1973 heads 
> Can I use the 343 flat top pistons on the 71 360 rods in the 1971 360
block.
>
> Thanks 
> Bryan
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
http://splatter.wps.com/pipermail/amc-list/attachments/20080730/7085c250/attachment.htm

> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
>
>   

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://splatter.wps.com/pipermail/amc-list/attachments/20080731/cfb1f97a/attachment.htm 
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list