Re: [Amc-list] piston interchange

[James Shadwick <idahoAMX@xxxxxxxxx>]

Bryan....

The 343 FT pistons will fit in your 360 just fine....however you should 
be aware that your
CR will be around 11 to 1  even with the 58cc heads.....I built a 360 
with Badger 343 FT
pistons for my Gremlin race car.....with 56cc heads my CR was around 
11.2 to 1 ...
ran really good........make sure you check your piston to valve 
clearance ....

Jim


teamamc wrote:
> I am having a brain fart here. 
> I have a 1971 360 engine block I am boring  40 over. 
> I have a new set of 40 over 343 flat tops pistons. 
> I have the 1971 360 Rods  
> I will have 58 CC 1973 heads 
> Can I use the 343 flat top pistons on the 71 360 rods in the 1971 360 block.
>
> Thanks 
> Bryan
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://splatter.wps.com/pipermail/amc-list/attachments/20080730/7085c250/attachment.htm 
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
>
>   

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list