Re: [Amc-list] intake ports, was exhaust tuning

[adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)]

" From: Tom Jennings <tomj@xxxxxxx>
" 
" 
" It's hard to describe, but the I I ports aren't *quite* siamesed; the 
" port walls come to a triangular point (at least on this head). It's moot 
" though. Even if you sawed and milled off the trough (SHUDDER) you'd end 
" up with at best a 1/8" - 1/4" flat between adjacent intakes.

how about leaving the trough as a mounting surface?  the ports are
pretty close to round where they enter it, right?  my idea is to
mill a step in each port for a tube to sit in.  have the tubes go right
through the plate that bolts to the trough and weld them to it.

" EFI would solve it all.

add injectors as required...
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx                       and think what none thought
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list