Re: [Amc-list] 195.6 OHV Progress Sorta

[Tom Jennings <tomj@xxxxxxx>]

On Sat, 16 Feb 2008, JOE FULTON wrote:

> It's not a perfect world or at least a cheap one.


> with a new .060 oversize piston in #1 cylinder the
> piston skirt to bore clearance was excessive.  The
> manual says .0006 to .0017 is acceptable.  I was
> measuring at least .004  Two other cylinders were

So what does sleeving cost? Are stock-bore pistons easier to
find and is there any cost offset because of that?
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list