Re: [Amc-list] 62 classic strut rod bushings

[Tom Jennings <tomj@xxxxxxx>]

-- d stohler <das24rules@xxxxxxxxx> wrote:
> well, i finally got my problem solved i THINK. i
> ordered strut rod bushings for an 80 concord. moog
> parts, so rubber should be ok. they just pull apart.
> so pilled the rubber off the metal spacer. trimed the
> beveled end off of the bushing. cut the little metal
> spacer ring down the same width as the bushing. the
> metal sleeve is a little bigger around than the strut
> rod. i welded that sleve to the stock washers to hold
> them im place. bolted it all together and so far
> everything seems to work normal again. the back half
> of the bushing was not there. the front half was only
> about half left.


Hmm, I hope you have better luck with that than I did; see 2nd picture down 
here:

<http://wps.com/AMC/Strut-bushing/index.html>

In section WHAT DIDN'T WORK!

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list