Re: [Amc-list] Pressing Hubs

[Wrambler242@xxxxxxxxxxx]

Take the studs out and press them apart, or BFH if not reusing the drum.
If you need the drum, well, I'd heat it around the hub abd spray it with PB blaster of equiv till it comes loose. After all these years it may be real stuck.
Honestly, to clear the hub, I just use a BFH and watch my knuckles. Drive the studs out and knock the drum off.
I always keep the hubs for whatever may need them.

--
Mark Price
Morgantown, WV
1969 AMC Rambler, 4.0L, EFI, T-5
" I was different before people dared to be different" 

 -------------- Original message ----------------------
From: JOE FULTON <piper_pa20@xxxxxxxxxxx>
> Does anyone have any tips for pressing the hubs out of
> the front brake drums on a 65 Rambler American?  Do
> you have to heat the drums?
> 
> Thanks for any good advice you can offer.
> Joe Fulton
> Salinas, CA
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://www.amc-list.com/mailman/listinfo/amc-list

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list