Re: [Amc-list] 2.73 ratior model 20 carrier
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Amc-list] 2.73 ratior model 20 carrier



My 85 J10 has a AMC 20 rear diff that is 2.7two:1. 
could be 49/18 (2.7222) or less likely 38/14 (2.7143).

Ken


Quoting RetroRalph <retroralph@xxxxxxxxxxx>:

> Armand,
> I scanned a couple pages on the AMC 20 rear-ends with this type of info 
> from Dick Datson's "The AMC Survival Book"  that I have here.It is 4 
> image scans range from 77k to 211K file size I think.
> 
> I believe it indicates the 2.73 diff is only is for the 7 9/16" rear end 
> for both STD and TwinGrip..  It is not shown in spec for the 8 7/8" rear 
> end.  It shows as being 15/41 tooth gears for the 7 9/16" which muct be 
> the AMC 15 Rear.
> 
> Let me know if you want the scans of that Dick Datson Info. 
> ______________________________________________________________
> Ralph Ausmann  -  Hillsboro, OR - > <ralph.ausmann@xxxxxxxxx>
> http://mysite.verizon.net/res79g4m/
> 
> 
> 
> ----- Original Message ----- 
> From: "Armand Eshleman" <aje1@xxxxxxxxxxxxxxx>
> Subject: [Amc-list] 2.73 ratior model 20 carrier
> 
> 
> Thanks Andy and Frank for responding to my questions. Unfortunately I 
> still
> have no why to identify what carrier I have.
> It is a twin grip or trac lok as the Jeep version is called. It has the
> square large opening in the side of the carrier where the twin grip 
> internal
> parts are installed through. Is there a way to identify which
> carrier/differential assembly this is?? How can I determine if it will 
> fit
> the 2.73 ratio or the 3 series??
> Thanks,
> Armand
> 
> 
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://www.amc-list.com/mailman/listinfo/amc-list
> 


_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated