Re: [AMC-List] mustang suspension

[Mark Price <markprice242@xxxxxxxxxxxx>]

I neglected to mention that I don't think the Mustang stuff is even close to working.
I'll look into seeing if I can find the info for that co I found. I'd like to get a fix for the lack of good bushings and the lack of adjustabiliy on the early cars.
--
Mark Price
markprice242ATadelphia.net
Morgantown, WV


---- d stohler <das24rules@xxxxxxxxx> wrote: 
> ok, im not sure where the mustang 2 suspension came in at. if anyone has the issue of car craft, with the red lookin i think it was a chevelle on it, they did an upgrade on their mustangs suspension. it has tubular upper a arms, tubular lower arm, not a arm, adjustable strut rod, and ball joints upper and lower. 
>    
>   my thing is not with the trunion. mine are still serviceable. my bushings are going bad. it sat in a field for 20 years or so. and then i started drivin it and have in the last 6 years put about 6000 miles on it. i have seen that at espo i think it was i can get bushings. the strut bushing tho i have been told is the weird one for my 62 big body car. something about they are to small or something. dont really understand how it was described to me before. anyway that it wont work the way it was bought. i got that tubular triangulated rear suspension to put in it. i was liking how the tubular suspension for the stock mustang looked. keeps the factory high spring. no need to cut spring towers or nothing. i just wanted to know if anyone knew if the length of the mustang arms are anywhere near the same as the rambler and if where the lower and upper mounts are, the spindle would still sit true to the road surface. if i confused anyone i didnt mean to. i know i can just pull my
>  stock stuff apart and repaint it and get most of the bushings. the strut arm tho is what i have been told is the pain in the rear. i guess if no one understands exactly what im talkin about i will just have to wing it and find out... 
>    
>   frank by the way, i got a mustang 2 disk brake kit. the hubs do NOT NOT NOT fit my spindles. the bearings suplied are different size, my bearings for my stock hub dont fit the m2 hub, and the spindle would need to be extended out about 1.5" to keep from rubbin on the trunion. it is an 11" rotor. i could make it fit maybe by finding bearings that might fitby trial and erorr. and use some kind of braket maybe to space out the spindle. but then strength factor would come in to play. i didnt feel like playin that route. not sure how else an m2 rotor is suposed to fit. i like the idea of using the factory hub and putting a hat over it. that might work.... 
>    
>   dave stohler
>   (confused today)
> 
>  
> ---------------------------------
> We have the perfect Group for you. Check out the handy changes to Yahoo! Groups.
> _______________________________________________
> AMC-List mailing list
> AMC-List@xxxxxxxxxxxx
> http://www.amc-list.com/mailman/listinfo/amc-list
> 
> or go to http://www.amc-list.com

_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list

or go to http://www.amc-list.com