Re: Concord turn signals

[amcnut@xxxxxxxxxxxxxx]

Richard:
It should be relatively easy to remove the dash cluster from that Concord. There are about 5 or 6 screws that run along the upper edge of the dash cluster, a couple of screws just inside the glove box door, and a screw on the side between the wiper and headlight switch. You will have to snake your hand up behind the cluster and unscrew the speedo cable, then the whole cluster assembly should just tilt forward at the top and lift up out of the dash. Unplug the wiring and you're free!

What might be screwing you up is the fact that the overlay for the cluster includes that piece that surrounds the center AC vents and that all of it must be removed as a unit. However, it's not too bad a deal. I've taken enough of those dashboards apart I can pretty much do it blindfolded. 

Also, glad to hear you finally found the "other" flasher and fixed your problem!

Jeff Reeves
Auburn GA
79 Spirit GT
73 Javelin 401
72 Javelin SST
69 Ambassador DPL

=============================================================
Posted by wixList Archiver -- http://www.amxfiles.com/wixlist