Re: Concord Turn Signals

["Jim Blair" <carnuck@xxxxxxxxxxx>]

A: You do know there are 2 flashers up there? You may have changed the wrong 
one. Also, sometimes the 4 way flasher button gets part way engaged and the 
lights quit working. Way to tell if the flasher you changed is emergency (4 
way) or not is see if it clicks or not when you set the button. Another 
possibility is power surge taking out all the bulbs (mine did that when my 
battery was loose and hit the hood going over bumps)



Subject: Re: Concord Turn Signals

On June 23, 2005 Richard Estermyer wrote:

> Any clue here.  80 Concord Wagon, working great.  Couple weeks ago blinker
> started getting noisy or at least I started to notice it clicking when
> turning.  Then noticed after a couple days that the turn signals were not
> working.
> I replaced the flasher and still no turn signals.  I checked bulbs and 
> they
> were good, even replace the backs with good bulbs, still nothing. 
> Emergency
> flashers working.  Turn signal switch is tight as new as is everything 
> else
> on the car.
> Any suggestions?  Having to learn hand signals all over again.
>
> Richard
>
>
> Richard Estermyer
> 6235 S. Mohawk Avenue

> Ypsilanti, MI 48197