As in 1" larger diameter -- 12" rotors (IIRC the standard Concord rotor is ~11")?? If so, are they the same thicknes (0.8x") and do they use the same bearings? If that bigger rotor will fit a Concord spindle, and is the same thickness, just a new cut from 3/8" sheet steel caliper adapter will get you a bigger brake -- will just require 15" wheels. Should be the same thickness if the same caliper is used -- Eagle used same thickness rotor as Concord IIRC. On April 21, 2005 andrew hay wrote: > the 2pc uses the same rotors as eagles and '89-earlier 4wd mj/yj/xj. > the 1pc are their own part, like the concord's but ~1" larger. > > all of these also use the ['82-3] concord's delco calipers. > ________________________________________________________________________ > Andrew Hay the genius nature > internet rambler is to see what all have seen > > adh@xxxxxxxxxxxxxxxxx and think what none thought > > > > . ============================================================= Posted by wixList Archiver -- http://www.amxfiles.com/wixlist