Re: FW: Jeep 4.0 in an American?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: FW: Jeep 4.0 in an American?



i said...

" ---------- Original Message ----------------------------------
" From: adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)
" 
" >" From: "Jim Blair" <carnuck@xxxxxxxxxxx>
" >" 
" >" A: There are 2 styles of 2wd outter ends I have seen so far. One looks just 
" >" like a 4x4 one with plugs in the back of the bearing where the shaft comes 
" >" through and the other has 1 piece rotors (off my son's '89 Comanche) that 
" >" look like '80 Concord rotors.
" >
" >the 2pc uses the same rotors as eagles and '89-earlier 4wd mj/yj/xj.
" >the 1pc are their own part, like the concord's but ~1" larger.
" >
" >all of these also use the ['82-3] concord's delco calipers.
" >________________________________________________________________________
  
 
" From: Mark Price <mail@xxxxxxxxxxxx>
" 
" I wonder if the larger Jeep rotor could be adpated to the AMC spindle?
" The 82-3 Concord Caliper bracket would be fairly easy to copy in a
" format that moved the caliper to where it needed. I'll have to see
" which axle is under the front of the 88.


" From: "Widiker, John D" <john.widiker@xxxxxxx>
" 
" Ok Andrew, I've got a 1982 Concord setup for my 1970 AMX, is there a caliper
" bracket that will let me use the 1 inch larger rotors you referred to??
" Please more info!!! I just got a set of 18x9 inch wheels and need the
" largest rotor possible to prevent the brakes from looking so teeny tiny. 


" From: farna@xxxxxxx
" 
" As in 1" larger diameter -- 12" rotors (IIRC the standard Concord rotor
" is ~11")?? If so, are they the same thicknes (0.8x") and do they use
" the same bearings? If that bigger rotor will fit a Concord spindle, and
" is the same thickness, just a new cut from 3/8" sheet steel caliper
" adapter will get you a bigger brake -- will just require 15" wheels.
" Should be the same thickness if the same caliper is used -- Eagle used
" same thickness rotor as Concord IIRC. 


so -- i looked into my napa brake book again, and --
concord rotors are 10 3/4"
1pc ['86-'93] xj rotors are 11 1/16" - not alas 1" larger.

they do use the same #6/#2 bearings.  they're about the same hat
depth.  with the same calipers and pads, they must be the same
thickness +/-.  but they aren't much bigger.

btw all 'new jeep' [xj onward] rotors appear to be about 11 1/16".
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen

adh@xxxxxxxxxxxxxxxxx                       and think what none thought





Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated