[BaadAssGremlins] Pacer V8 factory tach & clutch pedal setup wanted
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[BaadAssGremlins] Pacer V8 factory tach & clutch pedal setup wanted





Not mine but Sam is looking for a V8 Pacer tachometer & a clutch/brake pedal setup for same; I don't know if this setup interchanges with Gremlin & Hornet, either way, if someone can help him out, please feel free to comment, and copy your reply to Sam who would appreciate it, thanks in advance to all who might reply.
Eddie Stakes
713.464.8825
eddiestakes@xxxxxxxxxxxxxxxxxxxx
www.planethoustonamx.com
----- Original Message -----
From: Sam Mcpeak
Sent: Sunday, January 16, 2011 9:16 PM
Subject: Re: 1978 amc pacer factory tach

Thanks Eddie
i purchased a nice 1978 pacer wagon
with a 304 in it, the car has 48000 miles
on it. im looking for a clutch pedal system
to change it over to a 5 speed.
or if i can find a amc turbo 400 that would
 work  also..

let me know if you can help me ..
please email me anytime ..

 SAM 


From: Eddie Stakes <eddiestakes@xxxxxxxxxxxxxxxxxxxx>
To: Sam Mcpeak <n5pay@xxxxxxxxx>
Sent: Sun, January 16, 2011 8:27:12 PM
Subject: Re: 1978 amc pacer factory tach

Hi Sam, those were about $150 new and I have only had 2 in stock in 27 years a vendor. I had a 6 Pacer tach on my watch list on ebay a few weeks ago though, it sold for about $120. They are uber rare as not very many people opted for them. I saw a NOS one sell for $400 at a AMC national meet first day they put it out on table. Used usually command 1/2 that but only if ever seen. And unfortunately with something as rare as that, only place you wil find one is ebay or maybe big national AMC event.
 
Those were used from 76-79 if I recall. It's a small vertical thing, but again, not whole lot of Pacer V8s made and on top of that, not lot of folks opted for a tach. Sort of like a ski rack, not many people wanted one of those either.
 
I don't know of any other verticle tach that would fit in that clock/tach Pacer hole either. Take care & good luck,
----- Original Message -----
From: Sam Mcpeak
Sent: Sunday, January 16, 2011 8:14 PM
Subject: 1978 amc pacer factory tach

Howdy Eddie .
This is Sam in Tempe Tx
 
Im looking for a factory tach for a
1978 amc v-8 pacer if you have one
or know where i can get one let me know.
 THX  SAM




__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated