Re: [BaadAssGremlins] Wanted gremlin or hornet steering gear box

[Ed Veneck <edveneck@xxxxxxxxx>]

AMC used saginaw steering boxes so they will interchange with most GM box.  You just need to be sure that the pitman arm shaft travel the same degree of travel as your old box.  Also they changed the dia. of the input shaft somewhere around 1973.  If you are going when PS, you will need to be sure that the hose fitting are the same, if not, there are adpater that you can buy, or have hoses made.

 

Here is a link on rebuilding the saginaw steering boxes that may give you more insight. http://www.fourwheeler.com/techarticles/drivetrain/129_0801_saginaw_steering_box_rebuild/photos.html

 

Ed

--- On Sun, 12/12/10, dale <dcharlesfridley@xxxxxxxxx> wrote:

From: dale <dcharlesfridley@xxxxxxxxx>
Subject: [BaadAssGremlins] Wanted gremlin or hornet steering gear box
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Date: Sunday, December 12, 2010, 6:17 PM

 

I would like to know what cars came with a close ratio std. steering box? Does anyone have one? thank you Dale

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___