[BaadAssGremlins] 151 4cyl trans to 258-6 interchange question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[BaadAssGremlins] 151 4cyl trans to 258-6 interchange question





Claire below is wondering whether a 4sped trannie behind is 151 4cyl will stand up to a 258-6. I personally think it would those are indestructible little trannies, I believe a Chevy 350 will bolt up to it also. Regardless, if anyone here wishes to comment or advise, please feel free to and thanks in advance to all who might, be sure to copy your reply to Claire down below also who would appreciate it.
Eddie Stakes
713.464.8825
eddiestakes@xxxxxxxxxxxxxxxxxxxx
www.planethoustonamx.com
 

Clair is wanting to know if the 4 speed manual trans out of a 1980 Spirit with 4 cyl 151 engine is beefy enough to go behind a 258 I6 cyl in his 1977 Hornet Hatchback - AMX clone?  Do you have any interchange info?

I found:  http://www.gremlinx.com/AMC-Transmissions.htm  but did not see a reference to what was used behind the 151 in 1980???

From: Clair Maughan  heymaun@xxxxxxxxxxxxx  

Hello,  Thanks for the visit about the 77 AMX Hornet drivers door and front fender.  Here's my e-mail address.  Could you also check on the 4 speed, if the AMX is heavier duty than the one behind the 4 cyl.  

 

 

 

 

 



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated