Re: [BaadAssGremlins] 5/16 feeding 400hp
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BaadAssGremlins] 5/16 feeding 400hp





Have u tried another duraspark box?
Olly

Sent from my BlackBerry device on the Rogers Wireless Network


From: "z_man401"
Date: Tue, 18 Aug 2009 22:29:56 -0000
To: <BaadAssGremlins@xxxxxxxxxxxxxxx>
Subject: [BaadAssGremlins] 5/16 feeding 400hp

 

I am having issues with my 401. Under load my car does not like to rev past 4000 rpm. My timing is 34 or 33 degrees advanced at 2500 rpm,
I have tried both an Edelbrock 800 cfm and Holley 770 Avenger and no difference. I have the Duraspark ignition.. I will be upgrading to TFI as we speak.. I have a brand new Edelbrock RPM fuel pump(which made no difference..

I was talking to guys at the local speed shop shop and they said 5/16 line is the problem. I have heard 5 /16 will support 500 hp.

anyway I know at most i might have 420 hp.

My specs

401 bore .040
forged 10:5 to 1 pistons
edelbrock RPM heads/intake
Comp Cam 236-246 @ .050 520 int 538 ex
edelbrock shorty headers
Edelbrock RPM PUMP 5/16 in and 3/8 out

I looked at one of my plugs (i dont feel like taking headers off yet)
and it shows perfect light brown color...

Any suggestions?

Rob



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated