Re: [BaadAssGremlins] Bushings

[Hal <strlcuckoo_46@xxxxxxxxx>]

I had already ordered the $70(X2) ones when I got the reply about the Phoenix place! I ordered the bushings from pheonix and will return the others absorbing the restocking fee, saving about  $135

Lost in Wichita Falls, TX

--- On Wed, 3/25/09, Davis Martin <martin-davis@xxxxxxxxxxxxx> wrote:

From: Davis Martin <martin-davis@xxxxxxxxxxxxx>
Subject: Re: [BaadAssGremlins] Bushings
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Date: Wednesday, March 25, 2009, 6:25 AM

SOme one is making them in rubber. You know what will happen. AFTER you finish the front end you will find them.

 It's the way it always happens to me.

 Davis

--- On Tue, 3/24/09, Hal <strlcuckoo_46@ yahoo.com> wrote:

From: Hal <strlcuckoo_46@ yahoo.com>
Subject: Re: [BaadAssGremlins] Bushings
To: BaadAssGremlins@ yahoogroups. com
Date: Tuesday, March 24, 2009, 5:35 PM

Prothane is where I got the "kit" but they didn't have these .

Lost in Wichita Falls, TX

--- On Tue, 3/24/09, Davis Martin <martin-davis@ sbcglobal. net> wrote:

From: Davis Martin <martin-davis@ sbcglobal. net>
Subject: Re: [BaadAssGremlins] Bushings
To: BaadAssGremlins@ yahoogroups. com
Date: Tuesday, March 24, 2009, 6:29 AM

Hal,

 Have you tried Prothane?

 I would start there.

 Davis

--- On Mon, 3/23/09, HEL <strlcuckoo_46@ yahoo.com> wrote:

From: HEL <strlcuckoo_46@ yahoo.com>
Subject: [BaadAssGremlins] Bushings
To: BaadAssGremlins@ yahoogroups. com
Date: Monday, March 23, 2009, 4:50 PM

Guys,
I'm replacing all my Gremlin's bushings and am looking to see if anyone knows where I can get the bushings that go on the "spring perch", they encase the rod that holds the "perch" to the "A" frame.Going all polyurethane so that would be nice if possible.
Hal

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___