Re: [BaadAssGremlins] Bushings

[Hal <strlcuckoo_46@xxxxxxxxx>]

try this one

 

AFAIK, nobody makes these bushings. Here's a polyurethane substitute that
works well.

http://wps.com/ AMC/bushings. html

 

 

Lost in Wichita Falls, TX

--- On Wed, 3/25/09, Davis Martin <martin-davis@xxxxxxxxxxxxx> wrote:

From: Davis Martin <martin-davis@xxxxxxxxxxxxx>
Subject: Re: [BaadAssGremlins] Bushings
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Date: Wednesday, March 25, 2009, 6:26 AM

YOu care to share that source?

--- On Tue, 3/24/09, Hal <strlcuckoo_46@ yahoo.com> wrote:

From: Hal <strlcuckoo_46@ yahoo.com>
Subject: Re: [BaadAssGremlins] Bushings
To: BaadAssGremlins@ yahoogroups. com
Date: Tuesday, March 24, 2009, 5:42 PM

I did find a source at $69 each and already ordered them. I am thinking I may order a set of the poly ones and return the others.....don' t like wasting $120.

Lost in Wichita Falls, TX

--- On Tue, 3/24/09, Davis Martin <martin-davis@ sbcglobal. net> wrote:

From: Davis Martin <martin-davis@ sbcglobal. net>
Subject: Re: [BaadAssGremlins] Bushings
To: BaadAssGremlins@ yahoogroups. com
Date: Tuesday, March 24, 2009, 6:29 AM

Hal,

 Have you tried Prothane?

 I would start there.

 Davis

--- On Mon, 3/23/09, HEL <strlcuckoo_46@ yahoo.com> wrote:

From: HEL <strlcuckoo_46@ yahoo.com>
Subject: [BaadAssGremlins] Bushings
To: BaadAssGremlins@ yahoogroups. com
Date: Monday, March 23, 2009, 4:50 PM

Guys,
I'm replacing all my Gremlin's bushings and am looking to see if anyone knows where I can get the bushings that go on the "spring perch", they encase the rod that holds the "perch" to the "A" frame.Going all polyurethane so that would be nice if possible.
Hal

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___