Re: {Disarmed} [BaadAssGremlins] piston

[James Shadwick <idahoamx@xxxxxxxxx>]

The CR for the 82 360 is closer to 8.4 to one....if this is a street car 
and you want to run pump gas I think the 9 to 1 pistons
would a good fit. IMO....the 360 has cast aluminum pistons from the 
factory.....

If you want more than 10.2 CR .. check these out  ..

68/69 343 pistons in a 360 will give around 11.2 cr with later heads. 
http://www.hdmaddog.com/Shop/Control/Product/fp/vpid/5234245/vpcsid/0/SFV/32166

http://performanceamstyle.com .. check with Randy .. his prices are a 
little higher....

http://www.bulltear.com/catalog/product_info.php?cPath=21_35&products_id=193

http://www.alfanoperformance.com/index.html


wpvmddds wrote:
> Pistons:
> The best the shop can find are 9:1 compression pistons, essentially 
> identical to what was in it.  On the web Falcon Racing offers "cast 
> aluminum" (?) 10.25:1 compression "hi performance" pistons.  In my 
> very limited experience, I had not heard of cast aluminum pistons.  
> Any thoughts or recommendations?
>
> I


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/BaadAssGremlins/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx 
    mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/