Well, after almost 2 years of piddling around with my 76 Hornet/AMX, it is finally progressing. Flat-bedded it to the body shop to have the whole thing blasted and primed and dropped the 360 (from an 82 wagoneer) off at one of the few remaining speed-shops in the metro Detroit area. Hell, I can remember when I was a teenager in the San Fernando Valley in Los Angeles, there was a shop every few miles on all the major blvds. Now, not only are the shops gone, so are many of the parts suppliers (especially as AMC'ers know only too well) Pistons: The best the shop can find are 9:1 compression pistons, essentially identical to what was in it. On the web Falcon Racing offers "cast aluminum" (?) 10.25:1 compression "hi performance" pistons. In my very limited experience, I had not heard of cast aluminum pistons. Any thoughts or recommendations? Ignition: MSD vs Moroso????????? Thoughts, opinions? Thanks!!!!!!! Warren ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/BaadAssGremlins/join (Yahoo! ID required) <*> To change settings via email: mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/