Re: [BaadAssGremlins] Re: Rear crossmember
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BaadAssGremlins] Re: Rear crossmember




Is their a poly-urethane mount available for a 727?
 
Thanks, Olly


----- Original Message ----
From: teamamc <teamamc@xxxxxxxxxxx>
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Sent: Tuesday, October 2, 2007 9:20:05 AM
Subject: [BaadAssGremlins] Re: Rear crossmember

There are 3 different rubber mounts.

1 used for the standard trans.

2 is for the 727 and

3 is for the 904/998( something)

 

I think the 727 uses the one that comes up from the crossmember

About 2” and then 90 degree bent and measures about 4” toward the rear

With the 2 mounting holes to bolt to the tranny.

 

The 904/998 uses one that comes up about 4” and 90 degree bent and

Measures 2” toward the rear, With 2 mounting holes.

 

I will take a pick of all three and post it on here.

 

Bryan

 


No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.488 / Virus Database: 269.13.37/1042 - Release Date: 10/1/2007 6:59 PM




Yahoo! oneSearch: Finally, mobile search that gives answers, not web links. __._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated